The RapidSlat Series 626 Stormtite Door is perfect for climate controlled situations and applications with weather extremes such as external doors on a food manufacturing facility.
Standard Features At a Glance
- Max. standard width
up to 20' (6096 mm) depending on gauge and slat type
- Max. standard height
up to 20' (6096 mm) depending on gauge and slat type
- Mounting
Interior or Exterior face of wall
- Curtain
- Interlocking roll-formed slats, end locks attached to prevent lateral movement; 22 gauge steel
- Flat Profile type F-265I for doors up to 20' wide; 24 gauge galvanized steel front slats / 24 gauge galvanized steel back slats
- Slat cavity shall be filled with CFC -free, foam-in-place, polyurethane insulation, R-Value = 7.7, U-Value = .13, Soundrating = STC-21.
- Bottom Bar
Two primed, black painted angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge w/ yellow/black striped vinyl cover
- Guides
Structural primed black painted steel, 1/4” min. thickness
- Operation
Direct drive hypoid gear motor/brake assembly (20” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual crank for power outage
- Control Panel
Variable frequency drive controller w/ self diagnostics (time delay self close timer and non-resettable cycle counter included); two line LCD readout, enclosure NEMA 4X rated
- Door Roll
Direct driven, springless roll w/ integrated shafts; self aligning greasable sealed bearings; door does not require counterbalance device
- Hood
24 gauge galvanized steel primed, black painted; interior hood baffle included
- Brackets
Min. 1/4” hot rolled primed, black painted steel
- Safety Devices
Photoelectric sensors; 2-wire black/yellow striped electric fail-safe sensing edge; automatic stop-lock brake
- Actuator
Single open/close/stop push button station incorporated into Control Panel
- Curtain Finish
Gray or tan powdercoat w/ “anti-graffiti” hardening additive
- Windload
20 psf when wear strips are not specified
Options:
- Flat Profile type F-265I for doors up to 20’ wide also available in:[Front Slat] 22, 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; .040” Aluminum. [Back Slat] 22 ga. steel; 24 ga. stainless steel; .024” aluminum
- Bottom Bar also available in: galvanized steel; stainless steel; aluminum
- Guides also available in: galvanized steel; stainless steel; aluminum
- Hood also available in: powdercoat; stainless steel; aluminum. Sloped Hood also available.
- Brackets also available in: powdercoat; galvanized steel; stainless steel
- Direct Drive motors available in 208/230/460 VAC 3-ph
- Dual photoelectric sensors available for safety
- Optional push buttons, loop detectors, radio control, motion detectors, or any combination thereof available for door operation/control
- Powder-coat paint finish in 197 standard colors, or color-matched to specification
